How to Repair Your Garage Door on Your Own

How many times have you been disturbed when you reach home after a long hectic day and your garage door would refuse to work? Definitely, you have installed an automatic garage door with an electric opener to make your life easier and convenient not more hectic. A professional garage door repair company like, Schaumburg garage door repair company will help you regarding all types of garage door problems to restore its performance. However, it is always suggested that try to solve the issues on your own. You can fix minor problems by yourself even you don’t have enough expertise regarding the mechanism of the garage door.

The first and foremost step is to check the electric supply and electric power of the garage door. Here you need to make sure that all the electric systems are in good working conditions. Next, you will have to find out any hindrance that may disturb the machine. Often it may be accumulated dirt or grease. You should need to check the metal tracks and rollers where the dust is most likely to accumulate and will result in the stuck garage door. Don’t forget to inspect the photoelectric sensor. Make sure it is not dirty or misaligned. It is also good to use the powdered graphite or high-quality lubricant to grease the dry rollers and other moving parts of the garage door because a lack of lubrication is one of the most common reasons behind the malfunction garage door.  There are a lot of lubrication products that you can find at your local hardware store as per your needs and budget.

For rollover garage doors, rusty or worn out screws or nuts are the major issue leading to a malfunctioned garage door. Due to frequent use, screws may become loose and can cause the tracks to move to another angle that is not good to the garage door. These tracks should be aligned for the smooth functioning of the garage door. You can use a screwdriver to fix all the loose screws of mounting brackets that are holding the tracks.

For the swing up garage doors, the metal mounting plates are the parts that would need special attention. These mounting plates are responsible to hold and secure the springs along with the inner side of the garage door.

Proper alignment of garage door opener and mounting plates will aid the garage door in the closing operations. If you found any loose part here, they should be tightened to make them secure. Not it’s time to check the garage door torsion springs. They may become loose or worn out with the passage of time. While inspecting these springs, you will find a hook at the end of each spring. You will have to adjust them in the nest hole to adjust their tension.

Remember, give good maintenance to the garage door is vital. You should replace the torsion springs every five to seven years. Look for the loose screws, nuts, bolts inside the mounting brackets, and worn out hinges.

If you are not able to fix these problems on your own, then stay away from it. What can be more annoying if you tried to fix one part, and not only failed to accomplish bit also opened several problems? Of course, it is not good. It is strongly recommended to try to an extent like, replacing the batteries, cleaning and lubricating the garage door parts, and so on, exceeding will result in great loss. If you think that you are not able to handle your garage door, it is good to hire a professional garage door technician who has the right expertise on how to handle garage door problems.